CPU_VS_GPU / 2026-09-11
AMD Ryzen 3 8300GvsNVIDIA RTX 5070
Complete bottleneck analysis at 1080p, 1440p, Ultrawide (UWQHD/SUWQHD), and 4K with estimated FPS for popular games.
8%
ESTIMATED CPU BOTTLENECK
Your CPU (Ryzen 3 8300G) introduces a slight limitation at 2560x1440. Real-world impact is small and both components work well together.
Below 15% this is a normal imbalance: nothing needs changing to play well.
Load estimated by the model, not measured on your PC.
- PROCESSORAMD Ryzen 3 8300G
- GRAPHICSNVIDIA RTX 5070
- MEMORY16GB DDR4/DDR5
- RESOLUTION2560x1440
Average across the demanding titles at 2560x1440.
Average across the competitive titles, where the processor leads.
What the build draws (465 W) plus headroom.
DEEP-DIVE ANALYSIS
GENERATED BY THE ENGINEAre the AMD Ryzen 3 8300G and the NVIDIA RTX 5070 a good match? To find out we modelled the pair from 1080p up to 4K, cross-referencing the model's gaming scores for the CPU (58/100) and the GPU (48/100), calibrated against measured benchmarks rather than synthetic scores, with the demand profile of each game.
Bottom line: this pair carries 1440p
At 1080p the Ryzen 3 8300G becomes the limiting part (~33% CPU bottleneck), whereas at 4K the RTX 5070 is the limiting part (~26% GPU bottleneck). Of the common 16:9 sizes, the highest this pair holds above 60 FPS in AAA titles is 1440p, where it averages 70 FPS — that is the resolution worth buying a monitor for. Across every resolution tested, ultrawides included, the system runs at 74% average efficiency.
Think of resolution as a dial that splits the weight between CPU and GPU. Drop to 1080p and you wring out the RTX 5070 while leaning harder on the Ryzen 3 8300G; push to 4K and the opposite happens. Synergy here swings between 74% and 67% depending on where you sit.
In esports titles like Valorant this pair flies — around 413 FPS at 1080p, plenty for a high-refresh monitor. At the other end, a demanding AAA like Alan Wake 2 drops to ~26 FPS at 4K, which is where the RTX 5070's ceiling really shows. Overall, expect about 86 FPS average in AAA games at 1080p and around 46 FPS at 4K.
[CPU] Ryzen 3 8300G
The Ryzen 3 8300G (58/100 on the model's gaming scale) brings 4 cores and 8 threads and determines how many frames per second the system can prepare.
[GPU] RTX 5070
On the graphics side, the RTX 5070 rates 48/100 for gaming in this model. Its 12 GB of GDDR7 set how far it can go on resolution and texture quality before video memory runs short. The higher the resolution, the more of the frame rate depends on it.
Beyond the FPS: Both parts come from nearby generations, which usually means a natural pairing with no platform surprises. You're combining an AMD platform with an NVIDIA GPU — a perfectly valid mix that imposes no penalty.
WHAT TO CHANGE, AND WHAT IT COSTS
At 1440p the Ryzen 3 8300G sets the frame rate and leaves part of the RTX 5070 idle. The imbalance is small (8%), so this is optional rather than a fix. The cheapest processor in our catalogue that keeps the card fully fed and clears our bar (at least 10% more frames) is the AMD Ryzen 5 5600: about 12% more in this model, with this card and 16 GB. It uses a different socket (AM4 instead of AM5), so the cost includes a motherboard.
The gain is the model's estimate at 2560x1440 with 16 GB, not a measurement of your PC, and prices change: check them at the retailer before deciding.
PRICE OF THIS PAGE'S PAIRING
Affiliate links — we earn a small commission at no cost to you. Full disclosure
SPECIFICATIONS
CATALOGUE DATA[CPU] AMD Ryzen 3 8300G
- Cores4C / 8T
- Clock3.4 – 4.9 GHz
- TDP65 W
- SocketAM5
- Single-thread3,770
- Multi-thread13,990
- L3 cache8 MB
[GPU] NVIDIA RTX 5070
- VRAM12 GB GDDR7
- Memory bus192-bit
- TDP250 W
- G3D Mark32,150
- Memory bandwidth672 GB/s
BOTTLENECK BY RESOLUTION
SYNERGY · AVERAGE FPSYour CPU (Ryzen 3 8300G) cannot feed the RTX 5070 fast enough at 1920x1080. The GPU sits waiting for frames, causing stutter and noticeable drops. A CPU upgrade is the highest-impact change you can make.
Your CPU (Ryzen 3 8300G) introduces a slight limitation at 2560x1440. Real-world impact is small and both components work well together.
Your CPU (Ryzen 3 8300G) and GPU (RTX 5070) are an exceptionally balanced match for gaming at 3440x1440 (Ultrawide 21:9). No realistic component swap would meaningfully improve this build.
Your GPU (RTX 5070) is the limiting factor at 5120x1440 (Super Ultrawide 32:9). In graphically demanding titles you will see lower frame rates; a faster GPU would deliver a clear improvement.
Your GPU (RTX 5070) is the limiting factor at 4K. In graphically demanding titles you will see lower frame rates; a faster GPU would deliver a clear improvement.
ESTIMATED FPS BY GAME
1920x1080SYSTEM DIAGNOSTICS
POWER · VRAM & PCIe · RAMPOWER ESTIMATION
The Ryzen 3 8300G (65W) and RTX 5070 (250W) add up to roughly 315W under load. Adding 150W for the rest of the system gives 465W, and with a 30% transient margin, 650W is the safe figure.
VIDEO MEMORY AND PCIe
The RTX 5070's memory bus (192-bit) and bandwidth (672 GB/s) describe its own video memory, meaning how fast the card reads its 12 GB of GDDR7, not the PCIe link to the processor. The PCIe link depends on the card, the processor and the motherboard slot together; our catalogue does not record PCIe generation or lane count, so the model does not estimate it. It matters most for cards with an eight-lane interface in older PCIe 3.0 boards: check the card's and the board's specifications.
SYSTEM MEMORY
This page assumes 16 GB in dual channel. At 1440p, the resolution recommended above, that meets the model's capacity target of 16 GB (enough for three in four of the games it covers), so more capacity would add little or nothing there. The target stays at 16 GB even at 4K, so a larger kit is for heavy multitasking or mods, not for these games. Memory speed and a second channel act on the processor's ceiling instead: they matter in the games the CPU limits, by an amount that depends on the game, and the calculator lets you enter your own kit.
HOW THIS PAGE IS CALCULATED
ENGINE v2026.08 · 2026-09-11CALCULATED, NOT WRITTEN
Every figure and every sentence comes from the same deterministic engine, driven by the catalogue specifications. That is what makes it reproducible: with the same engine version (2026.08) and the same catalogue, the same pairing always gives the same result. When either changes, the version and date above change with it, and the changelog says why.
WHERE THE DATA COMES FROM
Specifications come from the official AMD, Intel and NVIDIA datasheets together with PassMark and TechPowerUp. The gaming indices are calibrated against frame rates published by review outlets (TechPowerUp, TechSpot / Hardware Unboxed, Tom's Hardware, Gamers Nexus, Digital Foundry) rather than synthetic scores. That data is compiled, not measured here: this site runs no test bench of its own.
STATED LIMITS
Figures estimate native raster performance at high/ultra quality, with no ray tracing, upscaling or frame generation. We do not yet publish an externally validated error margin — the accuracy page states exactly where that stands.
* Affiliate disclosure: the Amazon links exist to show pricing. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Recommendation order is decided by the engine and does not depend on commission.
TRY WITH YOUR OWN HARDWARE
Customize RAM, resolution, and discover upgrade recommendations.
FREQUENTLY ASKED QUESTIONS
5Does the AMD Ryzen 3 8300G bottleneck the NVIDIA RTX 5070?
At 1080p the Ryzen 3 8300G becomes the limiting part (~33% CPU bottleneck), whereas at 4K the RTX 5070 is the limiting part (~26% GPU bottleneck). Overall, the GPU is the limit at high resolution, with 74% average efficiency across the 12 resolutions our model tests. The resolution we would target with this pair is 1440p, where AAA games average 70 FPS.
How many FPS do the Ryzen 3 8300G and RTX 5070 get at 1080p?
At 1080p this combination averages about 86 FPS in AAA games and around 255 FPS in esports titles. In Valorant we estimate up to 413 FPS.
Is this pairing good for 4K gaming?
Playable rather than smooth: about 46 FPS on average in AAA titles at 4K, with the RTX 5070 setting the limit. Upscaling (DLSS, FSR or XeSS) or lower settings are the usual way to reach 60 FPS.
What power supply do I need for the Ryzen 3 8300G and RTX 5070?
With an estimated combined draw of 315W across CPU and GPU, we recommend at least a 650W 80+ Gold supply (ideally ATX 3.0) to run with headroom.
Is the RTX 5070's 12 GB of VRAM enough?
12 GB covers all 11 tracked games at 1440p in the model; at 4K, 3 of them would need more, which costs frames or texture quality in those titles.